Eclipse AVN4429 Instalační manuál stáhnout pdf (Strana 9)

Deutsch Español Français Italiano

Nederlands

SvenskaEnglish

Using the splicing connector

Insert the connection cable [vehicle speed pulse signal

cable (purple/white), parking brake cable (red/white),

or reverse cable (green)] from the main unit and the

vehicle cable into the splicing connector.

Harness in the car

Press down the cover of the splicing connector and

squeeze it until it locks.

Lock

Attach a splicing

connector at this location

Reverse signal cable

Reverse lamp

Reverse signal cable

Connecting point for the reverse signal (example)

•

Be sure to connect the reverse signal cable. If it is not

connected, the vehicle position may be incorrect when

the vehicle is reversed.

•

Use a circuit tester to confirm that a sensing voltage of

6 V or higher is generated when the vehicle is reversed.

Tip

Use a splicing connector to connect the reverse signal

cable (green) coming from the main unit to the reverse

signal cable of the vehicle.

Route the reverse signal cable to the main unit .

Vehicle speed pulse signal cable

(purple/white), parking brake cable

(red/white), or reverse cable (green)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Žádné komentáře

Eclipse AVN4429 Instalační manuál Strana 9